Slidegenius, Inc.

How to Bounce Back from a Presentation Meltdown

This is a guest post from Kalibrr.com.

Imagine yourself in front of a crowded room. The lights turn down low so that only the stage and projector screen are in focus. You hear murmurs and whispers from the audience, patiently waiting for the next speaker to talk about the importance of building your network. They’re waiting for you.

Your hands start to sweat. The room suddenly feels warm even if you’re already in front of the AC, and the index cards (a.k.a. cheat sheets) you’re holding are starting to moisten at the sides. You prepared for this talk all your life — well, maybe just for a couple of days — but the experiences you’ve gathered since the start of your career make up for it.

This is a common problem whenever you’re about to do a presentation: anxiety. But when you can’t tame that anxiety, guess what will happen?

You’ll freeze up. You’ll experience mental block. And, worst of all, you’ll have it right in the middle of your presentation, just as you’re about to make an important point.

There’s a secret weapon you could use to bounce back:

ABSORB.

It’s not just a word or an acronym. It’s a process conceptualized by Terry Gault, Vice President of the Henderson Group, an investment management company.

Let’s see how these six letters can keep us grounded:

A – Aware

1-ABSORB-Aware

First things first: be aware that something’s gone wrong. You’re in an awkward situation, so don’t panic. If you do, you end up choking, and embarrassing yourself in front of your audience even more. Instead, what you should do is to…

B – Breathe

2-ABSORB-Breathe

Panicking can make you forget to breathe, or start breathing too fast. In fact, worried pacing or shallow breathing contributes to more panic. Calm down and breathe slowly. Take two deep breaths, and smile so you won’t look too tense. Remember: the mind needs a good supply of oxygen to function well.

S – Stillness and Silence

3-ABSORB-Stillness-Silence

It’s best not to tell your audience that something has happened, or that you forgot what to say. Instead, keep quiet, and again, keep calm. Silence creates anticipation and lets your audience absorb information you presented. That should buy you a couple of seconds to…

O – (Consider Your) Options

4-ABSORB-Consider-Options

What are your best possible options to casually get back on track?

Should you skip the slide? Should you make a joke? Should you scan through your notes?

Our advice: scan through your cheat sheets without looking like a total fool for forgetting. Casually walk towards where you placed your notes (and, hopefully, a glass of water), take a sip of water while scanning through them, then put down the glass and scan again.

R – Respond

5-ABSORB-Respond

If you’ve figured out what to do, act on it quickly but casually. Talk slowly after a few seconds of awkward silence just so your audience could also get back on track with you.

B – Breathe again

6-ABSORB-Breathe-Again

Take another deep breath to eliminate any remaining anxiety. Swiftly evaluate whether your response was effective. If not, try another approach. But if it was, remain calm and celebrate your victory!

When presenting, losing your nerve can be inevitable. Letting this get the best of you is not.

Develop this strategy when you’re prone to anxiety during presentations, and find a way to transform that energy into a positive approach. Otherwise, you’ll keep running into mental blocks.

Master your presentation so that you won’t even need to look at the slides. All it takes is practice, practice, practice!

Kalibrr is an online job matching platform based in the Philippines with over 5,000 customers worldwide. Kalibrr’s vision is to connect talent to opportunity at scale. Follow them on Facebook, Twitter, Instagram, and LinkedIn for more career advice.

Troubleshooting Your PowerPoint Display Issues

It’s every presenter’s worst nightmare.

You spend weeks preparing, designing slides and refining talking points. But when it’s finally time to set up your PowerPoint display, you can’t seem to make the slideshow work properly. You start to panic, realizing that your audience is slowly filling the venue. What will you do now?

Despite all your preparation, it’s hard to predict how everything will fall into place. Sometimes, there’s no avoiding technical difficulties. And it doesn’t have to be ominous as it sounds. Your presentation can still run smoothly even after a few PowerPoint display issues. Use this troubleshooter to identify and solve the problem.

PowerPoint Display Issue: The deck works well on the computer, but the projector won’t display it

After connecting all your presentation equipment, you find out that the projector isn’t working. Try these steps to solve the issue:

Double-check power switch

This might seem obvious, but it’s pretty easy to neglect when you’re focusing on a dozen different tasks at a time. Check to see if the projector’s power switch is on. If it isn’t, make sure that the projector is plugged into the outlet.

Check projector standby mode

If the power switch is on, check to see if your projector is running on standby mode. Maybe someone else was using it earlier and forgot to turn it off. The standby mode saves power and keeps the projector from overheating. Check if the fan is running even with the main bulb turned off.

Set up dual display 

Make sure you configure dual display for your laptop or PC. After connecting your laptop to the projector, hold down the Function (Fn) key and hit the Display key. Look for a key that illustrates two different screens. For older models, this key might have “VGA” on it. If you’re on a PC, you can enable dual display by holding the Windows key and pressing the letter P.

powerpoint display - laptop fn display keys
Press Fn + Display key to configure dual display on your laptop. (Photo Source)

Use the direction keys to toggle between different display settings. Don’t forget to choose Extend if you have Presenter View enabled.

Set up projector input source

You can also check to see if you have the projector input source correctly defined. There are several different modes to choose from. Maybe the projector is on TV mode by default. Change the setting to computer mode. Use the projector’s remote or look for a button on the top of the projector.

Readjust cables

Your PowerPoint display issues might also be caused by loose cables. Readjust the cables connecting your computer and projector. Use the thumbscrews to secure the cables onto their respective ports.

Readjust projector cover

A loose projector cover is another possible problem. As a safety precaution, a projector with a loose cover won’t turn on the bulb. Turn off the device and check if everything is tight and secure. Always switch off the projector before checking for a loose cover to avoid accidents.

PowerPoint Display Issue: The slide deck shows up on screen, but the display is bad or difficult to see

The projector works, but you’re getting very poor display. Maybe the image is cropped or the text looks blurry. Maybe your slides look dim and is difficult to read. These are the steps you can take to solve poor PowerPoint display issues:

Change projector and computer resolution to match  

The resolution of your projector and computer might not be compatible. If your computer display resolution is higher than the projector’s, you might end up with a cropped image. Check to see if you can adjust the projector to match your laptop or computer. If you can’t, you can also adjust your computer’s display settings in the Control Panel.

Turn off display on your laptop

It’s also possible that your laptop doesn’t allow for a strong output signal when dual display is enabled. Depending on the nature of your presentation, it might be better to just stick with an external display. As you did when configuring dual display, hit Fn + Display or Windows + P and choose Projector only.

powerpoint display - external display
Turn off external display. Press Fn + Display on your laptop or Windows + P on your PC.

Adjust projector settings

Another thing you can do is to tweak the projector’s settings. Use the remote or the control buttons to make changes on brightness and display. You can also change the position of your projector or adjust the elevator mechanism. Make sure that the projector is at a perpendicular angle from the screen.

Check room lighting

Another possible fix is to adjust the lighting inside the venue. Turn off lights that are near the projection screen. If the image still looks washed out, your problem might be a faulty projector bulb. Projector lamps can only be used for a certain period of time. Any longer and it will lose its brightness. Ask the technical staff for assistance on replacing the lamp. If they don’t have one available, you have no other choice but to switch off as many lights as the audience is comfortable with.

Fix color contrast

When everything else seems to check out and you’re still getting poor display, the issue might be with your color choices. Make sure your background and text colors have a really high contrast. Use dark backgrounds with white text, or vice versa.
Technical difficulties are no cause for panic. Troubleshoot your PowerPoint display issues and solve the underlying problem. If you’re quick on your feet, the audience might not even realize that something went wrong.

READ MORE: 

 

Featured Image: CollegeDegrees360 via Flickr